Page 1 of 1

roland TANGLED tape delay (re-501)

Posted: Sat Dec 27, 2003 7:48 am
by sebastian p.
I've got a roland re-501 tape delay. The tape is always getting tangled. I make loops out of quantegy 456, always getting eaten. Is Their a better tape to use? Is the exact length of tape important?, I've made some internal adjustments of the tape path, is it there? Any help is appreciated.....s

roland TANGLED tape delay (re-501)

Posted: Sat Dec 27, 2003 6:37 pm
by Looter
Go find a 8-track cassette and pry off the shell. The tape used in these is silicone "lubricated" for long life. Right now I'm using Leonard Bernstine live in concert to load my tape echos! :D

roland TANGLED tape delay (re-501)

Posted: Sun Feb 01, 2004 4:22 pm
by Neko
I've got a RE-201. Quantegy 456 is not bad but I prefer Quantegy 457, which is thiner and well lubricated &#40;sound is beautifull&#41;. You have to use a new tape, not a 30 years old one, because older are dead after a single week, stick on the tapeheads and are getting tangled. I think 456 is just too thick. <BR>Length is not very important, but 3 meters long is enough for a tape loop.

roland TANGLED tape delay (re-501)

Posted: Fri Feb 13, 2004 4:41 pm
by Looter
Older 456 is known to suffer badly from "tape shed", sitcky binders in the tape come off as it ages and breaks down. One way to fix it is to bake your tapes in an oven set to low heat, of course. <BR> <BR>I've never tried any AMPEX tape loops in my echo chambers but my experience has been that most reel-to-reel tape formulations tend to stick to the surfaces of the transport and end up wrapped around the drive capstan.

roland TANGLED tape delay (re-501)

Posted: Sat Mar 06, 2004 6:55 pm
by dsil
Hi guys, <BR>Just picked my secondhand Korg SE500 today and i think she's in serious need of some cleaning and revitalising. <BR> <BR>With it i got a tape-head demagnetizer, actually from fostex, but i think i can use this. <BR> <BR>What kind of tape can i use to make a new one? I reccon its the same tape for all machines, but it could be i'm wrong? <BR> <BR>Does anybody have more tips n tricks for maintenance?? <BR> <BR>Thnxz in advance

roland TANGLED tape delay (re-501)

Posted: Wed Apr 05, 2006 5:09 pm
by Looter
Get a 1/4" splicing block and some old 8-track carts.

roland TANGLED tape delay (re-501)

Posted: Fri Apr 07, 2006 3:22 pm
by DigitalIndian
Just be sure not to touch any metallic part of your machine &#40;specially the heads&#41;, with your demagnetizer otherwise you risk to magnetize permanently some part and get a useless machine

roland TANGLED tape delay (re-501)

Posted: Sat Jul 08, 2006 6:44 am
by DELETED
DELETED

roland TANGLED tape delay (re-501)

Posted: Tue Jul 18, 2006 12:41 am
by DELETED
DELETED

roland TANGLED tape delay (re-501)

Posted: Tue Jul 18, 2006 1:42 am
by DELETED
DELETED