Siren DIY

Moderator: interruptor

bobdstringer
Posts: 1
Joined: Mon Apr 25, 2005 9:50 pm

Siren DIY

Post by bobdstringer » Mon Apr 25, 2005 9:50 pm

Hey everyone, <BR> <BR>how's it going? <BR> <BR>I built Tobys siren &#40;thanks Toby&#41; and it is making noises but, I can't get P1 to work. <BR> <BR>I reckon it could be something to do with the fact that I used 2 ne555s instead of the correct combination of oscillator chips. Any ideas? <BR> <BR>I also noticed that on Tobys schematic the output &#40;3&#41; on U1 is marked as present but not connected to anything. <BR> <BR>I'll keep yous briefed if I get it working <BR> <BR>Take it easy <BR>bob

DubTerrier
Posts: 4
Joined: Fri Apr 29, 2005 6:42 pm

Siren DIY

Post by DubTerrier » Mon May 16, 2005 2:59 pm

Hello Dubbers <BR>I'm looking for the "Gerber" CSR file of this siren , <BR>a technician asked me that for build it . <BR>Can anyone help me ? <BR> <BR>Guidance

pete
Posts: 7
Joined: Mon Jul 01, 2002 5:26 pm

Siren DIY

Post by pete » Thu May 19, 2005 3:17 pm

these guys also sell sirens-radikaldubkolektiv.net

User avatar
interruptor
Posts: 1195
Joined: Sun Sep 04, 2005 11:46 pm
Location: Switzerland
Contact:

Siren DIY

Post by interruptor » Thu May 19, 2005 3:57 pm

Dubterrier: As far as I know "Gerber data" is the layout data for the printed circuit board. &#40;<A HREF="http://en.wikipedia.org/wiki/Gerber_File" TARGET="_blank">see here</A>&#41; I don't think it's really worth to do this for building one single unit.

pete
Posts: 7
Joined: Mon Jul 01, 2002 5:26 pm

Siren DIY

Post by pete » Wed Jun 01, 2005 4:16 pm

My friend built me a siren with this schematic, but how to make siren to play from the start when i press trigger button. sound goes in circle&#40;uau-uau..&#41;, but when I press,it's not reseting the sound to go from the start, but from somewhwere in the middle.thanks!

Patrick
Posts: 3
Joined: Tue Feb 26, 2002 3:10 pm

Siren DIY

Post by Patrick » Thu Jun 02, 2005 9:56 pm

if someone could translate that into english, that would be nice too...some of the words just dont work right when you run them through an online translator, wave becomes beach ...stuff like that etc etc etc...and what do the letters and things on the diagram itself mean

User avatar
interruptor
Posts: 1195
Joined: Sun Sep 04, 2005 11:46 pm
Location: Switzerland
Contact:

Siren DIY

Post by interruptor » Sat Jun 04, 2005 7:31 pm

pete: are you refering to <A HREF="http://www.interruptor.ch/sirenschematic.doc" TARGET="_blank">this schematic</A>? <BR>in this case try to discharge capacitor c1 &#40;use a resistor and hold it to both sides of the capacitor&#41;. i'm no specialist with analog circuitry but i know that usually a capacitor is charged and discharged to create an oscillation. for a siren there are two oscillators: a fast one that creates the tone and a slow one that modulates it's frequency. in this case c1 seems to be the capacitor of the slow oscillator. it's likely that the start button resets the flipflops, but does not discharge the two capacitors. if discharging it by hand as proposed above works, you could add a separate switch to the circuit just for this purpose.

Lio
Posts: 2
Joined: Fri Jul 15, 2005 4:47 pm

Siren DIY

Post by Lio » Fri Jul 15, 2005 4:47 pm

Greetings dubheads, <BR> <BR>Love this board! Give thanks for the work! <BR> <BR>My mate built us a siren according to the schematic availabe on this site. <BR> <BR>It works really well. May be 3 little things: <BR> <BR>- have enought space between the buttons to operate easily. <BR> <BR>- a box that is not too light so it hold in place <BR> <BR>- a big solid button for the trigger, we used a small one and sometimes you get crackling noises or the siren get stuck on play! <BR> <BR>Here my 2 cents on a strictly user point of view <IMG SRC="http://www.interruptor.ch/cgi-bin/discu ... /happy.gif" ALT=":&#41;"> <BR> <BR>Peace,

Lio
Posts: 2
Joined: Fri Jul 15, 2005 4:47 pm

Siren DIY

Post by Lio » Fri Jul 15, 2005 5:19 pm

Hello again, <BR> <BR>I am looking for a bit of advice on the type of echo I should use with the siren. <BR> <BR>I have a space echo but i'd like to use it for voice/instruments only and have a separate one for the siren otherwise it get a bit messy. <BR> <BR>It sound really good with the tape echo. So i'd like something with a similar sound but a smaller price. <BR> <BR>I considered the following options after reading the board: <BR> <BR>- line 6 echo park <BR>- headrush AKAI &#40;expensive!&#41; <BR>- boss pedal &#40;not too sure which model - i read that they were a bit rubbish&#41; <BR> <BR>or <BR> <BR>- Alesis Nanoverb <BR>- Boss DE-200 <BR> <BR>Does that sound right? <BR>But I am now a bit lost on what to choose... <BR> <BR>Its purely for sound system use. <BR> <BR>Any guidance would be really appreciated! Thanks! <BR> <BR>Peace,

DELETED

Siren DIY

Post by DELETED » Wed Jul 27, 2005 11:09 pm

DELETED

Global Purpose
Posts: 4
Joined: Tue Oct 04, 2005 2:51 am

Siren DIY

Post by Global Purpose » Tue Oct 04, 2005 2:51 am

Hi evryone , i suggest You to find the AD 80 IBANEZ delay thats the best one You can find second hand it might make You forget some crap tapefake echoes that need too much cleaning or repairing &#40;not all of them of course!!&#41;, this AD 80 is a big deal it s one of my favorite delay stomp box ... it s just "dommage" to use it just for a siren &#40;i dont like siren ...sorry&#41;hehehe <BR> me looking for a simple schematics to use an old accutronics spring tank &#40;8db2c1d&#41; as a spring reverb usable with mixing board and so on...if anyone could help....

Toby E
Posts: 3
Joined: Mon Jul 30, 2001 5:34 pm

Siren DIY

Post by Toby E » Thu Oct 20, 2005 10:06 am

Yo all !!! <BR> <BR>Returning to the board after a few years not visiting it...I'm so happy to learn that some of you were encouraged to build the siren according to the schematics... &#40;I'm really excited&#41; <BR> <BR>About resetting the sound &#40;to start from the beginning of the wave when pressing the button&#41;, I think it's impossi ble to do without circuit modifications - sorry...&#41;. <BR> <BR>But now that I'm studing electronic engeneering, I might strat bukilding more quarky effects in the near future... <BR> <BR>Toby E

TC
Posts: 1
Joined: Wed Oct 26, 2005 12:42 pm

Siren DIY

Post by TC » Wed Oct 26, 2005 12:42 pm

I have built somthing <BR>check this link to see it <BR> <BR><a href="http://www.dogsonacid.com/showthread.ph ... 9&cache=20" target="_blank">http://www.dogsonacid.com/showthread.ph ... 8a71f&thre adid=338349&cache=20</a>

seafran
Posts: 1
Joined: Tue May 02, 2006 3:47 pm

Siren DIY

Post by seafran » Tue May 02, 2006 3:47 pm

hi everyone, <BR>thanx to all for this research <BR>i m gonna try to build this siren soon <BR>good to find informations..! <BR>jah love.

Sky Hi Guy
Posts: 1
Joined: Sun Jun 18, 2006 12:17 pm

Siren DIY

Post by Sky Hi Guy » Sun Jun 18, 2006 12:17 pm

greetings and thanks, <BR>we build a dub siren using the information on this great site. <BR>and its sound great. <BR>one love, the Sky Hi Guy

jensen
Posts: 3
Joined: Wed Jul 05, 2006 2:13 pm

Siren DIY

Post by jensen » Wed Jul 05, 2006 2:13 pm

Thanks to Munky Lee, Toby E ,and The Interruptor . <BR> <BR>Sounds great, was really fun building it. <BR> <BR>Cheers guys <BR> <BR><a href="http://www.flickr.com/photos/27627153N0 ... 188151665/" target="_blank">http://www.flickr.com/photos/27627153N0 ... 151665/</a>

jensen
Posts: 3
Joined: Wed Jul 05, 2006 2:13 pm

Siren DIY

Post by jensen » Wed Jul 05, 2006 2:25 pm


papa otta
Posts: 7
Joined: Mon Oct 21, 2013 9:37 am
Contact:

dub siren

Post by papa otta » Fri Oct 25, 2013 10:38 am

hello massive,
take a look to my dub siren & other devices!
papa otta

http://banga-rang.blogspot.it

guidance

User avatar
interruptor
Posts: 1195
Joined: Sun Sep 04, 2005 11:46 pm
Location: Switzerland
Contact:

Post by interruptor » Mon Oct 28, 2013 8:33 pm

yes otta, these sound and look nice!

papa otta
Posts: 7
Joined: Mon Oct 21, 2013 9:37 am
Contact:

Post by papa otta » Tue Oct 29, 2013 7:57 am

thanx interruptor!
dub it!!!

Post Reply