roland TANGLED tape delay (re-501)

Moderator: interruptor

Post Reply
sebastian p.
Posts: 1
Joined: Sat Dec 27, 2003 7:48 am

roland TANGLED tape delay (re-501)

Post by sebastian p. » Sat Dec 27, 2003 7:48 am

I've got a roland re-501 tape delay. The tape is always getting tangled. I make loops out of quantegy 456, always getting eaten. Is Their a better tape to use? Is the exact length of tape important?, I've made some internal adjustments of the tape path, is it there? Any help is appreciated.....s

Looter
Posts: 111
Joined: Tue Mar 13, 2001 5:34 pm
Location: US

roland TANGLED tape delay (re-501)

Post by Looter » Sat Dec 27, 2003 6:37 pm

Go find a 8-track cassette and pry off the shell. The tape used in these is silicone "lubricated" for long life. Right now I'm using Leonard Bernstine live in concert to load my tape echos! :D

Neko
Posts: 1
Joined: Sun Feb 01, 2004 4:22 pm

roland TANGLED tape delay (re-501)

Post by Neko » Sun Feb 01, 2004 4:22 pm

I've got a RE-201. Quantegy 456 is not bad but I prefer Quantegy 457, which is thiner and well lubricated &#40;sound is beautifull&#41;. You have to use a new tape, not a 30 years old one, because older are dead after a single week, stick on the tapeheads and are getting tangled. I think 456 is just too thick. <BR>Length is not very important, but 3 meters long is enough for a tape loop.

Looter
Posts: 111
Joined: Tue Mar 13, 2001 5:34 pm
Location: US

roland TANGLED tape delay (re-501)

Post by Looter » Fri Feb 13, 2004 4:41 pm

Older 456 is known to suffer badly from "tape shed", sitcky binders in the tape come off as it ages and breaks down. One way to fix it is to bake your tapes in an oven set to low heat, of course. <BR> <BR>I've never tried any AMPEX tape loops in my echo chambers but my experience has been that most reel-to-reel tape formulations tend to stick to the surfaces of the transport and end up wrapped around the drive capstan.

dsil
Posts: 3
Joined: Sat Mar 06, 2004 6:02 pm

roland TANGLED tape delay (re-501)

Post by dsil » Sat Mar 06, 2004 6:55 pm

Hi guys, <BR>Just picked my secondhand Korg SE500 today and i think she's in serious need of some cleaning and revitalising. <BR> <BR>With it i got a tape-head demagnetizer, actually from fostex, but i think i can use this. <BR> <BR>What kind of tape can i use to make a new one? I reccon its the same tape for all machines, but it could be i'm wrong? <BR> <BR>Does anybody have more tips n tricks for maintenance?? <BR> <BR>Thnxz in advance

Looter
Posts: 111
Joined: Tue Mar 13, 2001 5:34 pm
Location: US

roland TANGLED tape delay (re-501)

Post by Looter » Wed Apr 05, 2006 5:09 pm

Get a 1/4" splicing block and some old 8-track carts.

DigitalIndian
Posts: 1
Joined: Fri Apr 07, 2006 3:22 pm

roland TANGLED tape delay (re-501)

Post by DigitalIndian » Fri Apr 07, 2006 3:22 pm

Just be sure not to touch any metallic part of your machine &#40;specially the heads&#41;, with your demagnetizer otherwise you risk to magnetize permanently some part and get a useless machine

DELETED

roland TANGLED tape delay (re-501)

Post by DELETED » Sat Jul 08, 2006 6:44 am

DELETED

DELETED

roland TANGLED tape delay (re-501)

Post by DELETED » Tue Jul 18, 2006 12:41 am

DELETED

DELETED

roland TANGLED tape delay (re-501)

Post by DELETED » Tue Jul 18, 2006 1:42 am

DELETED

Post Reply