The Dub Discussion Board: roland TANGLED tape delay (re-501)

roland TANGLED tape delay (re-501)... Log Out | Topics | Search
Moderators | Edit Profile

The Dub Discussion Board » DUB PRODUCTION » EFFECTS / SOUND MANIPULATION » DELAY / ECHO » TAPE DELAY » roland TANGLED tape delay (re-501)

« Previous Next »

Author

Message

sebastian p.

Posted on Saturday, December 27, 2003 - 08:48 am:

I've got a roland re-501 tape delay. The tape is always getting tangled. I make loops out of quantegy 456, always getting eaten. Is Their a better tape to use? Is the exact length of tape important?, I've made some internal adjustments of the tape path, is it there? Any help is appreciated.....s

Looter

Posted on Saturday, December 27, 2003 - 07:37 pm:

Go find a 8-track cassette and pry off the shell. The tape used in these is silicone "lubricated" for long life. Right now I'm using Leonard Bernstine live in concert to load my tape echos! :D

Neko

Posted on Sunday, February 01, 2004 - 05:22 pm:

I've got a RE-201. Quantegy 456 is not bad but I prefer Quantegy 457, which is thiner and well lubricated (sound is beautifull). You have to use a new tape, not a 30 years old one, because older are dead after a single week, stick on the tapeheads and are getting tangled. I think 456 is just too thick.
Length is not very important, but 3 meters long is enough for a tape loop.

Looter

Posted on Friday, February 13, 2004 - 05:41 pm:

Older 456 is known to suffer badly from "tape shed", sitcky binders in the tape come off as it ages and breaks down. One way to fix it is to bake your tapes in an oven set to low heat, of course.

I've never tried any AMPEX tape loops in my echo chambers but my experience has been that most reel-to-reel tape formulations tend to stick to the surfaces of the transport and end up wrapped around the drive capstan.

dsil

Posted on Saturday, March 06, 2004 - 07:55 pm:

Hi guys,
Just picked my secondhand Korg SE500 today and i think she's in serious need of some cleaning and revitalising.

With it i got a tape-head demagnetizer, actually from fostex, but i think i can use this.

What kind of tape can i use to make a new one? I reccon its the same tape for all machines, but it could be i'm wrong?

Does anybody have more tips n tricks for maintenance??

Thnxz in advance

Looter

Posted on Wednesday, April 05, 2006 - 06:09 pm:

Get a 1/4" splicing block and some old 8-track carts.

DigitalIndian

Posted on Friday, April 07, 2006 - 04:22 pm:

Just be sure not to touch any metallic part of your machine (specially the heads), with your demagnetizer otherwise you risk to magnetize permanently some part and get a useless machine

satan4was

Posted on Saturday, July 08, 2006 - 07:44 am:

Ein Schloss, Ein Wurst, Ein Kopf !was

betting line

Posted on Tuesday, July 18, 2006 - 01:41 am:

baseball handicapping

Posted on Tuesday, July 18, 2006 - 02:42 am:

Administration