The Dub Discussion Board: Phono connectors too wide problem

Phono connectors too wide problem Log Out | Topics | Search
Moderators | Edit Profile

The Dub Discussion Board » DUB PRODUCTION » EFFECTS / SOUND MANIPULATION » REVERB » SPRING REVERB » FISHER K-10 SPACEXPANDER » Phono connectors too wide problem

« Previous Next »

Author

Message

Neil C

Posted on Wednesday, September 08, 2004 - 11:46 am:

I've just got a Spacexpander (hurrah!). The only phono connectors I can find have ends that are too wide to comfortably connect side by side on any of the input/output pairings. I can connect up, but this forces one of the Spacexpanders sockets to bend outwards - is this OK for the unit?(The unit does have its original double phono lead, but it is (not surprisingly after 30 years or so) 'dodgy' and I won't be using it)

Also, what happens if two of the tubes are in the wrong sockets? My unit was delivered with the tubes removed and wrapped up seperately in the box. One tube was clearly marked as a 12ax7 (and marked as made in USA), but the writing on one of the tubes has completely worn off. The 3rd tube clearly has made in Great Britain marked on it but the tube type had almost gone except for the last number which is of course a 7, before that is what looks like the right hand half of a 4, but there's a chance it could be an x - I think it is probably the 7247 tube but I'm not 100% sure.

interruptor

Posted on Thursday, September 09, 2004 - 06:56 pm:

congratulations!
hmm.. i got mine with a radioshack cable which fits perfectly
connections

the aluminum box seems very well built so i don't think it will get damaged by a bit of pressure.
still there ARE cables around which do fit.

i can't help you with the other question. i have no idea how sensitive the tubes are. in my case the tubes are protected by alu covers which i could not remove so i can't even read what's written on them.
tubes

good luck
interruptor

Neil C

Posted on Friday, September 10, 2004 - 03:01 pm:

Thanks for the reply and the trouble of putting the pictures on, much appreciated.

I haven't yet found any connectors as narrow as that so far in the UK (altough I'm sure they must exist here), so I'm using the ones I have, and the unit is working fine.

I LOVE, LOVE, LOVE it. I spent ages playing a set of snare rim samples going through and getting the classic sound. Wonderful. Also, I put a full mix through with the reverb at zero, and I love the warmth it gave.

satan4bqn

Posted on Saturday, July 08, 2006 - 02:49 am:

Geben mir bitte eine Brotchenbqn

baseball handicapping

Posted on Tuesday, July 18, 2006 - 01:30 am:

best nfl picks

Posted on Tuesday, July 18, 2006 - 02:36 am:

Administration